What a grind

I think I know why one of the quotes we got for polishing our concrete floor was $17.50 a square foot - Boredom Pay.

The machine is a dream to work with, but it's a tad tedious going back&forth, back&forth, verrrrry slooooowwwwly - all day long.

It's so light & easy to manoeuvre that when I first started I was zooming across the floor thinking "this is easy, I'll be finished in no time" - until I looked at the ground I'd covered & realized that I wasn't doing anything - no difference at all. M u s t g o s l o o o o w.

It's slow going but not difficult, you just have to make sure that the machine NEVER stops moving for more than a second. I know this because we now have some interesting marks resembling crop circles engraved in the floor.
Then there's the power cord, the vacuum hose, the extension cord and the large canister dust-collector, all trying hard to trip me and stop the werkmaster in it's tracks. At least I'm getting a little exercise & stretching by kicking and pushing them out of the way while keeping the machine always moving.


The process is very much like sanding polymer clay.
You start with coarse grits (metal diamond-tipped grinding pads) to remove any nasty bumps and then progress through finer & finer grits (diamond pads) until you achieve the level of smoothness & shininess you want. The diamond pads go from 30 grit all the way to 3000, which gives you a high-gloss glassy finish (that's what the $17.50 quote was for). I don't think we'll be going all the way up to 3000, I don't really want a high-gloss floor (it's slippery) & it took me two full days to do the grinding step and first polishing step. With each grit you have to go over the floor in 4 directions: lengthwise, widthwise, diagonally & then diagonally in the other direction so I did a lot of walking.

I was able to start with the finest of the grinding pads because our floor was already very smooth and in fact, we could have skipped the ginding and started with the polishing pads if it hadn't been for those ........ oh dear, I haven't told the story of how I RUINED OUR FLOOR. So embarassing.

Confession time.
In my zeal to protect the floor and have the best surface for staining or polishing (we hadn't decided which) I covered it a few days after the pouring with some 'floor-protecting paper' that has adhesive strips along each edge to keep it in place. The label promised that it was easy-release adhesive and would leave no residue. Sort-of true. No sticky residue left once we finally got it to release, but that label didn't warn us about the properties of freshly-poured concrete: the parts smothered with the sticky stuff cured at a different rate so when we unwrapped our floor to get ready for the finishing we had dark lines, runways, racing stripes, alien landing strips, whatever you want to call them.

I was devastated.

It did make our finishing decision easy though. We had been waffling between staining the floor a warm colour or polishing the original gray. Acid staining would have emphasized the stripes; and grinding, while not completely removing them, is at least softening the effect. And after I getting over my initial guilt, I don't mind them so much. At least they're straight, evenly spaced and running in the right direction. In our TV nook they create a pattern sort of like an area rug.

There, that's my big(-gest) blunder. I wrecked our floors.
For penance I will spend at least 5 full days pushing a Werkmaster machine back&forth, back&forth, back&forth, verrrrry slowly while trying not to get too tangled up in cords & hoses.

My weekend's booked

Just found out the 'Werkmaster' has been fixed and is on its way to our house.
I'm really looking forward to grinding and polishing our concrete floors even though it'll probably take me the whole weekend.

If you see any elves hanging around with nothing to do this weekend, please send them to my home to do the laundry, cooking and cleaning for my family while I'm occupied elsewhere.

Marshmallow walls

Shhhhhhhh.... it's so quiet in here now.

The first thing we noticed after the first day of insulation was a huge difference in the way the house sounds. Everything sounds muffled, like when walking at night right after a heavy snowfall. That's something we're familiar with now, although this week its more of a 'splashy' sound, wading through slush and puddles.

The rooms seem more defined, even though it's only the ceilings and exterior walls that are filled in.

It's nice to finally SEE what looks like real progress, after a 3-week delay because nobody wanted to work in the cold or drive in the snow.
Next is the floor, which I'm grinding & polishing this weekend. Turns out it wasn't operator stupidity making the machine refuse to turn on, but a broken switch that they weren't able to fix until Jan 5th. (after the end of my holidays that I took just to do the floor) Then, fingers crossed, the drywallers start Monday.

For now we have nice padded rooms, which I'm afraid Kim might feel comfortable in after all the agony he's gone through with my fireplace.


Every step of the way has had a hitch, right from the ordering (dealing with picky, picky manufacturer), delivery (it got lost for a while), venting, installation (unclear manual) and framing. He had to take apart & rebuild each component at least once.


I'm hoping that eventually I'll be able to say the word 'Fireplace' without seeing a maniacal, murderous gleam in his eye.

Some days it just isn't worth getting out of bed.

New Years Eve we got up early to be at the house to meet the rental guy delivering a Werkmaster grinder for us to grind and polish our concrete floors.
Two and a half hours late he showed up with the machine, a vaccuum system and various diamond discs. It wasn't until he tried to plug it in to show us how to use it that he realized he hadn't brought the right adapter to plug it into the 220 outlet that I had had the electrician install just so we could use this machine.
He went back to Kerrisdale to get the adapter and we went off to have breakfast, although by then it was time for lunch.
When we got back the adapter was on our doorstep, along with a large bucket of densifier, which he had forgotten the 1st time, and a very large invoice.

Finally we were ready and I was excited. I'd spent the day before clearing out the downstairs and sweeping the floors clean, then spent the evening watching all the 'Werkmaster' training videos I could find on-line and was looking forward to trying out this machine & polishing our floors.
Good news: the adapter worked, the little red light on the machine was on, we had power.
Bad news: the end of the hose for the vacuum system didn't fit on the grinder. A quick phone call to the rental guy got us
"Oh, I must have thrown you the wrong hose. Can you duct-tape it on?"
Uh, no. Duct tape won't work in this case.
OK, so we don't have a dust-remover now. Lets just start it up and see just how much dust this thing kicks up.
Maneuver it into position in a closet, (start in an inconspicuous spot just in case) push the "On" button.
Nothing. No sound, no grinding, no sign of life except for the red light reading "STOP".
Check the plug, check the connections, flick the breaker on and off, still nothing.
Another call to rental guy. He advises us to do everything we'd already done. Then
"Sorry, I don't know what the problem is. I'm running late (well we knew that), have lots to do and we're actually closed for the day now."

Nothing else to do but go home and back to bed for an afternoon nap before going out for dinner.



(\__/)
(='_'=)
(")_(")

(Little bunny courtesy of Shea)

Well, what else is Boxing day for?

Linens'n'Things was closing and so desperate to empty the building that everything left in the store was either 70 or 90% off. They had a lot less to pack up after our second visit and even less the next day when I went back a third time, with my Mom & sister Tam.

Now we don't have to worry about peeping toms in the new house while we wait for me to sew window-coverings. We'll have everything covered with silvery-gray damask stripes ($12/pair) or roman blinds ($5 each).

Won't have to spend money re-covering or replacing our dining-room chairs either because they'll be covered too - in chair covers ($1.99 each) a brick colour similar to the coppery-red flecks in our granite.

Here's a slightly washed-out photo of a chunk of our granite next to my cherry kitchen cabinet door sample.

I found a few towels for the boys' bathroom. Their bathroom is designed with two teenagers sharing in mind. The toilet is in a separate compartment with a door on it and I have the perfect vanity for them. Two sinks, separated by a raised section of drawers.
My plan is for them to each have their own set of towels, using my old colour-code for them so I'll know who's leaving their wet towels lying around. I made it easy for me to remember: Lime green for green-eyed Cole, cobalt blue for blue-eyed Shea. And to hang the towels?

Hooks only, no towel bars because, apparently, they don't know how to use them!


May as well show more of what I've chosen for their bathroom.

'Rhythm' faucet, with matching tub/shower fixtures. The boys get their own style, different from the ones in the rest of the house but they're all single-hole, single-handle faucets. They just make so much more sense than needing two hands to get the right temperature.


A catalogue shot of the tub. Can't believe I haven't taken a picture of it in the house yet. It's there, installed already.

I chose this tub for a few reasons. It doesn't have sloping sides so there's maximum standing room for showering, as this tub will seldom be used for bathing. And see that extra-high bit extending up the wall? That means that the ledge where all the shampoo and body-wash bottles collect, has no calking-line to get all slimy and moldy.
And it's made in Canada.

Merry,

Merry

Christmas!

Fashion dilema

Basic Black? or.......

Stripes? or.......

Plaid?

Oh, just forget it all and slap on a coat of grey mud.

Then add a little frosting on top.

This was last weekend's snowfall. Yesterday's was much deeper but we didn't pull in to take a picture this morning and risk getting the car stuck.

Now that we've seen it like this I think we might change our mind about the colour and go with something a little deeper than white for the main colour. When the 'grey-coat' was first applied and still wet it was a nice green-grey. Maybe we'll go with a 'wet-stucco' look for the final coat. I think Benjamin Moore even has a colour called Wet Concrete". We have until spring to decide. (long enough to change our minds at least another 1/2 dozen times) because it's best to let the first two coats age a bit before putting on the final one. (not to mention that the dead of winter doesn't make for the best conditions) You just don't see it done often because houses can be a little hard to sell with rough, upainted stucco.

It seemed for a while like progress had stalled. Work was still being done but the only evidence was little piles of wood shavings on the floor. It was like we'd been invaded by a gang of small rodents building nests everywhere. Guinea pig hotel. It was only when you took a closer look that you realized there were now more cables or wires or pipes or ducts snaking through holes in the studs and floor. It's a wonder the house was still standing there are so many holes drilled in it.

Everyone did their job right though because we passed the framing inspection with only a short list of 8 things needing to be done. Nothing major, nothing that had to be re-done, but enough additional back-framing to keep Kim busy for the past two weekends.

He's almost done, now we're waiting for the weather to warm up enough that the insulation guys can do their thing. (bunch of wimps - when I get too cold there I sweep the floor, there's always sand - and gerbil beds - to be swept up & I warm up in no time.)

(ps - Zoya - I couldn't figure out a way to respond to your comment and couldn't find an email address for you - please email me directly. jesterkiss (at) telus (dot) net)